Yes, that would definitely fit your requirements.
Please be aware that the “100 gpd” capacity is rated with the water being 65 psi (450 kpa) and 77F (25C) as it enters the membrane housing. Anything lower will decrease the output.
My 200 gpd system in my greenhouse in Pennsylvania operated off of a well that was 30’ in front of my house, then ran 125’ to the greenhouse through a 1” pipe 4’ underground. In winter, I got about 60-75 gallons/day out of it.
By contrast, I build the identical unit to the one you’re looking at, but use 50 gpd, low-pressure membranes (25 psi). Right now, I am getting about 95 gpd out of mine, as my municipal water pressure here in North Carolina is considerably higher.
|