Making my own cloning paste?

[jax133jax]

I am a high school student in California, and for my senior project I am studying Orchids, Iv'e decided to learn about cloning, I already have a few pastes that ive been expiramenting with. I thought it would be an amazing accomplishment to create my own cloning paste. Im in the prosses of researching cloning pastes, but I havent found much about actually MAKING it. If any of you know about the chemical make up, or how the paste actually causes the orchid to produce a kekei, then i would love to hear from you.
Thank you so much,
Jax

[naoki]

Jax, so you are not doing meristem cloning, but you are interested in keiki paste, right? If so, you might want to learn about a plant hormone called cytokinin. I believe it was originally discovered from coconut milk in 40's to 50's.

[Ray]

and… The hormones are dispersed in lanolin.

[DavidCampen]

Here is an interesting catalog to look at:
Home Page - PhytoTechnology

[lepetitmartien]

(this thread is full of mysterious messages full of hints)

[klauts]

its really quite simple 600 to 1000 ppm benzylaminopurine lanolin paste is applied to dormant nodes.
to make the paste dissolve the BAP in 99% iso with a couple drops of dish soap and then mix into heated lanolin shake well for at lease 15 minutes and then ad back to heat to evaporate any alcohol left in the paste. let cool and apply to dormant nodes.

[DavidCampen]

Originally Posted by klauts

its really quite simple 600 to 1000 ppm benzylaminopurine lanolin paste is applied to dormant nodes.
to make the paste dissolve the BAP in 99% iso with a couple drops of dish soap and then mix into heated lanolin shake well for at lease 15 minutes and then ad back to heat to evaporate any alcohol left in the paste. let cool and apply to dormant nodes.

For people in the US, an interesting question is, is there any benzylaminopurine, benzylaminopurine paste or other keki paste that has been approved by the EPA for sale under the regulations of the Federal Insecticide, Fungicide and Rodenticide Act?

[kerristc]

I know this is an older post but klauts do you know how many grams of BAP into how much lanolin to get the 1000 ppm?

[Orchid-gurl]

Thank you. but why the alcohol and the soap. any reason ?

Originally Posted by klauts

its really quite simple 600 to 1000 ppm benzylaminopurine lanolin paste is applied to dormant nodes.
to make the paste dissolve the BAP in 99% iso with a couple drops of dish soap and then mix into heated lanolin shake well for at lease 15 minutes and then ad back to heat to evaporate any alcohol left in the paste. let cool and apply to dormant nodes.

[Ray]

Originally Posted by kerristc

I know this is an older post but klauts do you know how many grams of BAP into how much lanolin to get the 1000 ppm?

1 ppm = 1 mg per kg, so 1000 ppm = 1 g/kg