Donate Now
and become
Forum Supporter.
Many perks! <...more...>
|
12-17-2018, 03:50 PM
|
Member
|
|
Join Date: Dec 2018
Zone: 5a
Location: Iowa
Posts: 97
|
|
I just finally got an answer back from my local city water utility.
Quote: "The average hardness last month was 7.2 grains. Hardness varies throughout the year from 7 to 10 grains/gallon"
When asked about total dissolved solids - Quote: "We don’t test for Total Dissolved Solids so I don’t have any values to provide you for that." (insert eye roll here)
I guess I'm mixing RO/Rain/distilled water with my tap water. The question is at what ratio.
|
12-17-2018, 04:07 PM
|
Senior Member
|
|
Join Date: Aug 2016
Zone: 6a
Location: Northern Indiana
Posts: 5,540
|
|
How many plants do you have and how many gallons do you use in a week?
|
12-17-2018, 05:06 PM
|
Member
|
|
Join Date: Dec 2018
Zone: 5a
Location: Iowa
Posts: 97
|
|
I have five orchids total. Cattlianthe Secret Love (3" pot), a Cattleya walkeriana (5"pot), Rlc. Hsinying scarlet (3 cup plastic tub) and the two NoID Phals (one regular size 5 " pot and the new mini).
I don't really keep track on how much I use for the plants since there is several other types plants about the house besides the orchids.
|
12-17-2018, 05:12 PM
|
Senior Member
|
|
Join Date: Aug 2016
Zone: 6a
Location: Northern Indiana
Posts: 5,540
|
|
I'm sure I'll get in trouble for this. I use a pitcher water filter and I test the TDS and the pH. I take a couple kitty litter jugs and I run my tap water through that filter into the kitty litter jugs and that's what I water with. My water is very hard and there's a lot of iron in it but my orchids seem to be thriving. I know that there are more technical ways to do this but sometimes I feel that overthinking it is just unnecessary. I have over a hundred orchids and it takes me six gallons of water to water them and I use that twice a week that would be a total of 12 gallons.
|
12-17-2018, 06:23 PM
|
Senior Member
|
|
Join Date: Nov 2018
Posts: 315
|
|
Good humidifier Option!
Quote:
Originally Posted by annie.exe
I appreciate all your advice so much - thank you! I tried to make some changes. I moved my light down, moved all my non phals up on upside down pots, soaked/lightly fertilized, moved my bare root plants to terra cotta, and got a humidifier
Unfortunately I'm going to need to change the humidifier because it only lasted for 7 hours :/ .. It did up my humidity from 28% to 53% though so I'm hoping if I can find a good one that this will help my orchids a lot
Here's a picture with the changes as well as the label of the fertilizer I used: Imgur: The magic of the Internet
I know I still have a long way to go but I already think your advice will help my orchids a lot
Edit: removed video and added attachment of picture
|
If you are still in the market for a humidifier, the Vicks filter free cool mist has done a very good job for me. I have two of them and they are fairly cheap. I got mine from target in store and had them price match the target.com price of $35 a piece. Well worth while. I was going to look for pricier ones but then I was reminded the likelihood that after a year or so you may end up chucking it and buying a new one due to mold/mildew accumulation!
|
12-17-2018, 08:59 PM
|
|
Super Moderator
|
|
Join Date: Jun 2008
Zone: 10a
Location: Coastal southern California, USA
Posts: 13,849
|
|
Quote:
Originally Posted by cluelessmidwesterner
I just finally got an answer back from my local city water utility.
Quote: "The average hardness last month was 7.2 grains. Hardness varies throughout the year from 7 to 10 grains/gallon"
When asked about total dissolved solids - Quote: "We don’t test for Total Dissolved Solids so I don’t have any values to provide you for that." (insert eye roll here)
I guess I'm mixing RO/Rain/distilled water with my tap water. The question is at what ratio.
|
If you want to know the TDS, invest in an inexpensive meter (and a calibration solution for it, so that you'll know that it is working correctly) Then test your water now and then. Many water companies get their water from multiple sources, so TDS is highly variable. (Mine may be 180 ppm on a very good day, 450 on a very bad day, average usually in the neighborhood of 250.) You don't need to stress over exactly what you're using on the plants, but knowing what you have would give you a better idea of how you want to mix it with pure water. The other consideration on using part tap water is to have some idea of what minerals comprise that TDS... if it is mostly calcium and/or magnesium carbonate/bicarbonate, most plants can tolerate it quite well (and benefit from the calcium and magnesium, which are necessary in modest quantities) If it is sodium chloride (salt, as one would get from sea water intrusion) then you would not want to use it on your plants. That info should be in your water analysis.
|
12-26-2018, 10:38 AM
|
Jr. Member
|
|
Join Date: Nov 2018
Posts: 10
|
|
Thought I'd post an update after trying to take your advice and upgrading my setup a bit.
I think they've all definitely improved! The bare rooted Cattelya and Dendrobium are now potted in an orchid mix (bark, lava rock, etc) with just like two strands of spagnamoss mixed in there. The Vandas are now in clay pots with just a few strands of spagnamoss next to their roots.
I added a humidifier and upped my humidity from about 28% to around 40%.
I went to my local Orchid nursery - Orchids Limited in Plymouth, Minnesota and the owner helped me pick out 2 new LED bulbs. These are the ones I got: https://www.orchidweb.com/supplies/l...00-5000-kelvin The owner told me to put the lights 5 feet above my plants so for now I'm just rolling with that.
I also got a (in my opinion) nicer looking shelf from Menards.
I still have a lot to learn but I think that they're improving! Thanks so much for all your help!
|
12-27-2018, 04:57 AM
|
Senior Member
|
|
Join Date: Jul 2012
Zone: 8a
Location: Athens, Georgia, USA
Posts: 3,208
|
|
Quote:
Originally Posted by cluelessmidwesterner
I just finally got an answer back from my local city water utility.
Quote: "The average hardness last month was 7.2 grains. Hardness varies throughout the year from 7 to 10 grains/gallon"
When asked about total dissolved solids - Quote: "We don’t test for Total Dissolved Solids so I don’t have any values to provide you for that." (insert eye roll here)
I guess I'm mixing RO/Rain/distilled water with my tap water. The question is at what ratio.
|
For TDS, you can ask them again if the utility measures electrical conductivity (EC), also known as specific conductance (or conductivity). EC is usually reported in units of micro Siemens per centimeter (uS/cm). All any TDS meter does is estimate the TDS (in parts per million; ppm, same as mg/L) from EC, using a simple calculation. You can find the "how to" instructions for doing the calculation here:
How to Calculate Total Dissolved Solids: 10 Steps (with Pictures)
Spoiler alert: the formula is: TDS =[KE] × [EC]
Note that the calculation includes a "correlation factor", KE, which varies from 0.55 to 0.8. The KE will vary depending on the characteristics of your water. The KE of well water from northeast Georgia, well water from Chicago, sea water, rain water, tap water, lake water, pond water, and Okefenokee Swamp water, all will likely be different. A TDS meter has no way of knowing your KE, so the meter probably has a built-in "guess" for KE. If you have a measured EC, do two calculations using KE = 0.55 and 0.8, assume your water is somewhere in that range. A measured EC of 275 uS/cm has an estimated TDS between 151 and 220 mg/L (calculated), for example.
|
Post Thanks / Like - 1 Likes
|
|
|
12-27-2018, 01:12 PM
|
|
Senior Member
|
|
Join Date: Jun 2015
Zone: 9b
Location: Phoenix AZ - Lower Sonoran Desert
Posts: 18,647
|
|
Collect rain or snow. Very low in dissolved salts. I collect rain here in Phoenix.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 04:50 PM.
|